| 2-Ton Load Cell |
|
| 2-Ton Load Cell |
The Load Cell is the primary component in the newest load monitoring system manufactured by Motion Laboratories. The stainless steel Load Cells work in unison with the eight channel Cell*Mate Hub and Cell*Mate digital display module, giving users the opportunity to monitor dynamic and static loads in unlimited quantities, from one or more remote locations.
Each universal Load Cell has a 4500 lb. (2000 kg) measuring capacity with a built-in 5:1 safety factor.
Load Cells transmit in line force measurements to the eight channel hub unit via 6 pin XLR cables. The hub unit then sends all channels of data to the display module via a single 6 pin XLR cable. This feature greatly reduces set-up time by doing away with inefficient cable home-runs.
Load Cells are fitted with standard 5/8" rigging shackles with a 3/4" shaft. Spherical bearings at either end allow the Load Cells to self-align, eliminating side-load interference and providing the most accurate measurements possible. |
 E-mail this product to a friend
|
|
|
|
|
| 2-Ton Load Cell Hub |
|
| 2-Ton Load Cell Hub |
The eight channel Cell*Mate Hub unit works together with Load Cells and the Cell*Mate Digital Display Module from Motion Laboratories to make up the most versatile and informative load monitoring system on the market today. The truss-mount hub unit is the crossroads for up to eight channels of individual load data. Each Load Cell sends digital information to the hub, where it is collected and sent back to the display unit via a single 6 pin XLR cable. This digital signal can be carried as far as 4000 feet to the display unit. Hub units can accept 120/240VAC through the PowerCon at the front.
The Cell*Mate Hub greatly reduces cable clutter and allows for short runs to each of your Load Cell. It comes with a truss clamp. |
E-mail this product to a friend
|
|
|
|
|
| 2-Ton Cell*Mate Display |
|
| 2-Ton Cell*Mate Display |
The eight channel Cell*Mate Digital Display module provides users with the means to simultaneously monitor multiple channels of load data from a remote location. Working together with our universal Load Cells and Cell*Mate Hub, the display module gives users a wide variety of options for viewing load data. Each channel provides constant numeric actual weight measurement displayed in pounds or kilograms. Additionally, each channel has a ten-segment multicolor bar graph representing a percentage load based on a user selectable weight limit. There is a 120% overload LED indicator, which triggers a relay with user-assignable, normally open contacts.
The Cell*Mate receives data from the HUB unit digitally, using a single 6 pin XLR run of up to 4000 ft. Multiple display units can be used in series for extra viewing locations. Peak hold function allows the user to view peak weight statistics for each Load Cell. A user-adjustable tare function allows the user to view a secondary weight measurement, i.e. the load minus the weight of the hoist. |
E-mail this product to a friend
|
|
|
|
|
