The Load*Cell is the primary component in the Motion Laboratories manufactured weight monitoring system, the Cell*Mate. The stainless steel Load*Cells work in unison with the eight channel Cell*Mate Hub and Cell*Mate Digital Display module, giving users the opportunity to monitor both dynamic and static loads in unlimited quantities, from one or more remote locations.
2-Ton Load*Cells are fitted with standard 5/8" rigging shackles with a 3/4" shaft. 5-Ton Load*Cells are fitted with standard 3/4" rigging shackles with a 7/8" shaft. Each universal Load*Cell has a 2-Ton or 5-Ton rating with a built-in 5:1 safety factor.
Each Load*Cell transmits inline force measurements to the eight channel hub unit via a 6 Pin XLR cable. The Cell*Mate Hub unit then sends all channels of data to the Cell*Mate Digital Display module via a single 6 Pin XLR cable. This design greatly decreases setup time by eliminating multiple cable home runs.
Spherical bearings at either end allow the Load*Cells to self-align, eliminating side-load interference and providing the most accurate measurements possible.
The Load*Cell component of our Cell*Mate Weight Monitoring System is a precision measuring device and as such needs to be recertified on an annual basis. This must be done at our facility in Cortlandt Manor, NY. Please contact Motion Labs to schedule a recertification and to receive an RA#.
The Load*Cell also works with The WardeN, a new addition to the Cell*Mate family.
See Cut Sheet
for further details.