The Cell*Mate Digital Display module allow users the ability to monitor up to eight channels of Load*Cell data simultaneously from a remote location.
Working together with our universal Load*Cell and Cell*Mate Hub, the display module gives users a wide variety of options for viewing load data.
Each channel provides real time weight measurement displayed in pounds or kilograms. Additionally, each channel has a ten-segment multicolor bar graph representing a percentage of load based on a user-selectable weight limit.

There is a 120% overload watchdog function that will trigger both an LED indicator and a normally open set of contacts. These contacts can be used for a buzzer, siren, light etc to warn the user of an overload situation.

The Cell*Mate Digital Display module receives digitized load data from the Cell*Mate Hub via a single 6 Pin XLR cable. Multiple display units can be used in series for additional monitoring locations. The Peak Hold function allows the user to view peak weight statistics for each Load*Cell. A user-adjustable tare function allows the user to view a secondary weight measurement, i.e. the load minus the weight of the hoist. All products in the Cell*Mate family, The WardeN, The Cell*Mate Digital Display module and the Cell*Mate Hub, are designed with auto switching 100/240VAC 50/60 Hz power supplies allowing for versatility in the field.
The Cell*Mate Digital Display module also works with The WardeN, a new addition to the Cell*Mate family.
See Cut Sheet for further details.