Question or need to make a purchase: 800-227-6784
This little yellow hero has your back when you're pickling hoists with multipin cable, standing between you and danger. You alone are in control, independent of others who may be trying to operate the hoist. IN-D takes command away from other control systems, giving you one clear, safe point of operation for load in and load out.
No mishaps that become cautionary tales.
Just you, the hoist, and your yellow hero IN-D, keeping everyone safe.
Inline
-OR-
Direct Power
Available With P14 or 7Pin
Available With Any Qualifying NEMA Config
Guaranteed single point of control when using multipin fly cable systems during load in and load out. While MLI controllers provide a Contactor Enable solution to reduce the risk, IN-D goes further, removing the control portion of your fly cable and replacing it with the pendant in your hand.
By using a standard three phase connector on the inlet, you can provide quick access to power for setups, so convenient you'll wonder how you ever lived without it.
IN-D likes to work alone. No need for an extra pendant tail on every hoist, removing redundant, unreliable, and unnecessary connections from your inventory.
IN-DPENDANT, keep control in your hands.
For a limited time, if you purchase a complete system* with hoists and we install the multipin motor tails, we will include a FREE IN-DPENDANT.
Oh, and we'll throw in a sticker, because who doesn't love free stuff?
IN-DPENDANT is not intended to replace proper protocol. Always remove power before connecting or disconnecting any device. Be aware of your specific pinout and the condition of your equipment.
* A complete system consists of a motor controller, fly cables, hoists, chain bags and motor tails, minimum 4 channels.
